• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Fitting a cat flap can be a bit daunting however it's actually quite simple to install by following the correct instructions. Decide how high you'd like your cat flap to be (normally, it is at the belly height). Mark this point on the door and use the template included as a guideline to drill.

If you have a kitten, or a young kitten hold the door open very slightly and gradually encourage it to go through. Reward it each time it goes through.

Take a measurement of the door

A cat flap lets your pet to enter and exit your home at any time. This can help with keeping your cat healthy by making sure that it is exercising and also being able to get back in if it is left outside in bad weather, especially in winter. It also can reduce the amount of time you'll have to let it out or in and can also keep your home safe by allowing you to know when it's been out.

It is crucial that the flap on your cat flap installation cost is fitted correctly to prevent your pet from escaping through it or be pushed through by any other animals (e.g. dogs). You should determine the height of your pet's belly and the size of the doorway at your home to make sure the flap is at the correct height. You can adjust the position of your flap in case your cat is smaller or taller than average.

Then, use a spirit-level to mark the center of the door. This is where you will install the flap. Then, using the markings as a guideline, cut out the contour of the flap with a jigsaw. Once you have cut out the space, sand down the edges of the door to smooth the surfaces. Then drill any fixing holes that are required.

Fitting a cat flap should not take more than two hours. The process is slightly more complicated if you are required to install it on the form of a uPVC door or composite one. This is because composite doors come in different thicknesses, which could affect the way holes are cut. This is why we recommend hiring a professional to carry out the task, especially when you've never dealt with glass before.

Measure Your Cat

You will not have to spend hours of ignoring the pet's meow to be allowed in or out. This is especially helpful for cats that are inside in all weathers while you work.

It is crucial to measure your cat first before you begin the installation. It might appear to be a simple task, but it is important to measure your cat correctly. If not, your cat might find it difficult to use.

First, ensure that your cat is relaxed and not stressed before you take the measurements. You will have to hold your cat in a place where they cannot move. Also, ensure that the measuring tape is straight and not bent against the body. You can get a precise measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.

Once you've determined your cat's measurements, it's time to look at the door to determine the best place to place the flap. The flap should be placed at the level of your cat's belly. This will allow them to pass through the door without much effort. This will also avoid the flap from making lots of noise when it swings open and closed.

You must think about the thickness of the uPVC or composite door too. While all timber doors have a similar thickness, uPVC or composite doors are different in their overall structure. This makes fitting the flap for your cat flap installers near me more difficult, as you must ensure that the hole is of the correct size.

You can also use the template drawing included in the instructions to mark the location of the hole in the door. This will help you to determine where the opening needs to be, and also to make sure that the template is properly placed on the door. Using a spirit level to make sure that the template is sitting in a straight line against the door will also be very helpful.

Cut the Flap

Before you can put in your cat flap you have to cut the door's panel to create a space large enough to accommodate it. It can be a difficult job and it is recommended that you engage a professional to help you if you lack the knowledge or skills. You can also read the instructions provided in the kit to find out how to do it right.

To do this you need to take a measurement of the height of your cat or cat flaps kitten's belly. Use this as an indication point. A good guideline is to put the cat flap about 10-15 centimeters from the ground as this is roughly the average height of the cat's belly. This way your cat will be able to go through the flap with ease and also give the other cats or neighbours who are snooping an issue when trying to get in or out.

Mark the position of the cat flap on the door using pencil. Next, if your kit comes with a paper template, lay it over the door and use the marks to drill holes in each corner of the template. You will then be able to cut the shape of the template and replace it with your cat flap.

You can put in your cat flap yourself inside a wood or uPVC door when you're confident with the use of a jigsaw. Make sure you don't cut through any of the door's mullions or vertical rails. You can use a jigsaw to cut your panel into a square or a circle depending on the way you want it. Take your time and don't try to make the jigsaw cut faster.

After the hole has been made, carefully place the cat flap in its new place of residence. Make sure it is securely secured. If the flap has screws put them on the protruding bolts. Once the screws are in place, sand the rough edges of the cut and then seal any gaps to ensure there are no draughts coming into your home.

Place the Flap

If you have a basic cat flap you can leave it open and encourage your pet to go through by placing a small amount of cat flap installers food in front of the door. You can also push the cat with sticks or your hand. Once your pet has become used to walking through the flap it will be able to come and go at will. This lets you let it in and out at any time it's wanted.

You can install a cat flap into an UPVC or glass door however it's not as simple as fitting one into a wood external door since the upvc door panel with cat flap fitted doors and some glass doors aren't a uniform thickness. This could have a significant impact on how you cut out the flap's hole and whether the flap will fit correctly after installation.

The mounting kit might include a template that shows you where to drill holes. If the kit doesn't include a template, you are able to make one yourself. It's important to not push the jigsaw too in order to cut, so it doesn't leave a bigger than needed hole in your door.

The majority of cat flaps are square or rectangular in shape, however there are some that are circular and these are usually more difficult to fit. If you have a round flap, ensure that the hole is located in the correct place on your door. In the event that it is not, the cat may not be able to use it, and may be stuck outside the whole day (or night).

Certain models of cat flaps (try this website) have locks which let you control the time your cat comes and goes. They are helpful for pets who are afraid of leaving in the dark or coming back to the house at night. They can also be helpful for those who work all day. Certain locks can be used to lock entry or exit, and others can be locked both ways. This is helpful for sick or elderly cats who aren't keen to go outside in bad weather.